1pcs Kcd1-105n 2 / 3 Pin on / Off SPST Svirtinis Jungiklis atsparus Vandeniui Transporto priemonė, Laivas LED Šviesos Turas Laivo Tipas Jungiklis

€0.40 Nemokamas pristatymas

Žymos: Jungikliai, Šviesos Ir Apšvietimas, Pigūs Jungikliai, Aukštos Kokybės Šviesos Ir Apšvietimas, Jungikliai.

Yra sandėlyje

Aprašymas

  • Savybės: 3pin
  • Medžiaga: Plastikiniai
  • Yra Protingas Prietaisas: Taip
  • Garantija: 2 metai
  • Dabartinis: 10A
  • Prekės Pavadinimas: ZHRIVOER
  • Sertifikavimo: ROHS
  • Jungiklio Tipas: Svirtinis Jungiklis
  • Modelio Numeris: ON/OFF SPST Svirtinis Jungiklis atsparus Vandeniui 12V 20A

pakuotė

5
8
4
6
3
3
2
1
1
0

Reitingas: 4.25 out of 5 (4 votes)

4
Madmopmoore 2020-12-04

WRONG INFO ON THE SWITCH : 6A 250 VAC / 10A 125 VAC . But it is 12V led switch . Unknown current for 12V MISSING THE DIGRAM OF PINS ! Randomly checked few switches . LED and the contact working OK . Gold pin is for 12v NEGATIVE ( for the LED) 2 silver pins are switchable . Youi may use any of them as the supply 12v DC POSITIVE and the second one to feed the charge . Remark : the LED light will glare only when the switch is ON , and you connect NEGATIVE to the gold pin and POSITIVE 12V DC to any of silver pins ! Not possible to get the LED to glare if the switch is in OFF position (e,g, to mark the location of the switch in the darkness)

5
Xy F I B S X 2021-01-11

OK

4
Safinvadim 1999 2020-12-04

WRONG INFO ON THE SWITCH : 6A 250 VAC / 10A 125 VAC . But it is 12V led switch . Unknown current for 12V MISSING THE DIGRAM OF PINS ! Randomly checked few switches . LED and the contact working OK . Gold pin is for 12v NEGATIVE ( for the LED) 2 silver pins are switchable . Youi may use any of them as the supply 12v DC POSITIVE and the second one to feed the charge . Remark : the LED light will glare when the switch is ON , and you connect NEGATIVE to the gold pin and POSITIVE 12V DC to any of silver pins ! Not possible to get the LED to glare if teh switch is in OFF position (e,g, to mark the location of the switch in the darkness)

4
Nedved D 2020-12-04

WRONG INFO ON THE SWITCH : 6A 250 VAC / 10A 125 VAC . But it is 12V led switch . Unknown current for 12V MISSING THE DIGRAM OF PINS ! Randomly checked few switches . LED and the contact working OK . Gold pin is for 12v NEGATIVE ( for the LED) 2 silver pins are switchable . Youi may use any of them as the supply 12v DC POSITIVE and the second one to feed the charge . Remark : the LED light will glare when the switch is ON , and you connect NEGATIVE to the gold pin and POSITIVE 12V DC to any of silver pins ! Not possible to get the LED to glare if teh switch is in OFF position (e,g, to mark the location of the switch in the darkness)

Parašyti atsiliepimą

Reitingas